BVFQH - G697 DIMETHYLPOLYSILOXANE GREASE
- MSDS: BVFQH
- Manufacturer: GENERAL ELECTRIC CO SILICONE PRODUCT DIV
- Product Name: G697 DIMETHYLPOLYSILOXANE GREASE
- National Stock Number: 6850-00-142-9810
Product Identification
Product ID:G697 DIMETHYLPOLYSILOXANE GREASE
MSDS Date:02/12/1993
FSC:6850
NIIN:00-142-9810
MSDS Number: BVFQH
Responsible Party
WATERFORD, NY 12188
US
Emergency Phone: 518-237-3330
Info Phone: 518-237-3330
Preparer: DA POSILNELLI
Cage: 01139
Contractor
Telephone: 215-743-8200
Cage: 2B613
Ingredients
ZINC NAPHTHENATE
CAS: 12001-85-3
RTECS: QK9275000
Fraction By Weight: 1-5%
TRADE SECRET COMPONENT
Fraction By Weight: 5-10%
OSHA PEL 15 MG/M3
ACGIH TLV: 10 MG/M3
SILICA GEL (AMORPHOUS SILICA)
CAS: 112945-52-5
RTECS: VV7310000
Fraction By Weight: 1-5%
OSHA PEL 6 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST
POLYDIMETHYL SILOXANE
CAS: 9016-00-6
RTECS: TQ2690000
Fraction By Weight: 80-99%
Hazards
Routes of Entry: Inhalation:NO Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE- SKIN AND EYE IRRITATION. A DUST
HAZARD MAY BE CREATED IF SOLID PARTICLES ARE SEPARATED FROM POLYMER
MATRIX. MAY BE HARMFUL IF SWALLOWED. CHRONIC- PROLONGED OR REPEATED
EXPOSURE MAY CAUSE RESPIR ATORY AILMENTS OR SILICOSIS.
Explanation of Carcinogenicity:NO INGREDIENT OF A CONCENTRATION OF 0.1%
OR GREATER IS LISTED AS A CARCINOGEN OR SUSPECTED CARCINOGEN.
Effects of Overexposure:SKIN: REDNESS, DISCOMFORT. EYES: TEARING,
REDNESS, DISCOMFORT. INHALATION OF DUST: COUGHING, WHEEZING,
SHORTNESS OF BREATH. INGESTION: NOT SPECIFIED BY MFR BUT HMIS
BELIEVES-NAUSEA, VOMITING, DIARRHEA (TYPICAL GI TRACT IRRITATION).
Medical Cond Aggravated by Exposure:NONE KNOWN.
First Aid
First Aid:INHALATION:REMOVE TO FRESH AIR, PROVIDE CPR/OXYGEN IF NEEDED.
EYE CONTACT:FLUSH WITH WATER FOR 15 MINUTES. GET MEDICAL HELP. SKIN
CONTACT:WASH WITH SOAP AND WATER. REMOVE CONTAMINATED CLOTHING. GET
ME D ATTENTION IF SYMPTOMS PERSIST. INGESTION:RINSE MOUTH WITH
WATER SEVERAL TIMES, DRINK 1-2 GLASSES OF WATER OR MILK. GET
MEDICAL HELP IMMEDIATELY.
Fire Fighting
Extinguishing Media:MEDIA APPROPRIATE FOR SURROUNDING FIRE.
Fire Fighting Procedures:NONE SPECIFIED BY MANUFACTURER. HMIS: WEAR
SELF-CONTAINED BREATHING APPARATUS AND FULL PROTECTIVE GEAR.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
Accidental Release
Spill Release Procedures:WIPE, SCRAPE, OR SOAK UP IN AN INERT MATERIAL
AND PLACE IN A CONTAINER FOR LATER DISPOSAL. WASH WALKING SURFACES
WITH DETERGENT AND WATER TO REDUCE SLIPPING HAZARD. WEAR PROPER
PROTECTIVE EQUIPMENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:AVOID CONTACT WITH SKIN AND EYES.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NONE NORMALLY REQUIRED. USE NIOSH APPROVED
SELF-CONTAINED BREATHING APPARATUS IF TLV IS EXCEEDED OR WHEN
SPRAYING OR USING IN CONFINED SPACES, OR CREATING DUST FROM CURED
PRODUCT.
Ventilation:USE IN A WELL VENTILATED AREA.
Protective Gloves:CLOTH GLOVES
Eye Protection:SAFETY GLASSES
Other Protective Equipment:EYE WASH STATIONS
Work Hygienic Practices:WASH HANDS AFTER USE AND BEFORE EATING,
DRINKING, OR SMOKING. LAUNDER CONTAMINATED CLOTHES BEFORE REUSE.
Supplemental Safety and Health
THIS PRODUCT CONTAINS POLYDIMETHYLSILOXANES WHICH CAN GENERATE
FORMALDEHYDE AT ABOUT 300F (150C). FORMALDEHYDE IS A SKIN AND
RESPIRATORY SENSITIZER, EYE & THROAT IRRITANT, ACUTE TOXICANT, AND
POTENTIA L CANCER HAZARD. AN MSDS FOR FORMALDEHYDE IS AVAILABLE
FROM GE SILICONES.
Chemical Properties
HCC:V7
Vapor Pres:NEGLIGIBLE
Vapor Density:NEGLIGIBLE
Spec Gravity:1.032
Evaporation Rate & Reference:NEGLIGIBLE (BU AC=1)
Solubility in Water:SLIGHT
Appearance and Odor:OF-WHITE SOLID; SLIGHT ODOR
Percent Volatiles by Volume:1.0
Stability
Stability Indicator/Materials to Avoid:YES
NONE KNOWN
Stability Condition to Avoid:NONE KNOWN
Hazardous Decomposition Products:CARBON MONOXIDE AND CARBON DIOXIDE,
SILICON DIOXIDE, ZINC METAL FUMES, FORMALDEHYDE.
Disposal
Waste Disposal Methods:DISPOSAL SHOULD BE MADE IN ACCORDANCE WITH
LOCAL, STATE AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.